What causes a refrigerator to not get cold enough

Refrigerator Not Cold Enough : Possible Causes. A refrigerator not staying cold enough is a hassle, as you are at risk of spoiling the foods inside. Most often, this problem is caused by something easy to fix. The door gaskets in a refrigerator ensure a sealed closure every time you shut the door.

Defrost system problems, dirty condenser coils, fan failures, leaky door gaskets or control problems can lead to your freezer not getting cold enough. If the refrigerator is running, but not cooling at all or is not cold enough , several factors may influence the temperature.

If the evaporator fan is not working, it will not circulate the cold air to the refrigerator compartment. To determine if the evaporator fan motor is defective, try turning the fan blade by hand. For a freezer to cool properly, air must be able to circulate.

The temperature control board provides the voltage to the fan motors and compressor. These boards are often misdiagnosed. Check all other components to be certain this is the cause of the problem. Is it getting cold at all?

Another issue could be with the condenser fan.

Or just barely getting cold? Newer models have a circuit boar too complex to fix. I have just fixed my refrigerator for same problem. Mine was serviced once when the heat element for. The only place that moisture can come from is the outside air.

Likely you are frosting up the coils because of the air leak and that reduces. Fixing refrigerator that not cooling enough by recharging R-134a Freon DIY - Duration: 27:25. Teddy Hashee 687views. The most common fridge not cooling problem is a frost free failure. Remove the access panel in the freezer section to expose the evaporator coils.

If the coils in the freezer section get plugged up with frost, this frost will block the evaporator fan motor from blowing the cold air around. If your freezer is full of frost,. GE TBX19PASPRWW fridge with freezer on top. Turned out my freezer was frozen solid.

I had to thaw out my freezer and put it back together. The pushing and pressure creates heat, forming hot gas that later cools and absorbs heat from the freezer and fridge. My ice cream is soft and only half frozen.

It is not staying cold enough. The ice cubes are slow to come out and are half the size. They are also half melted when I dispense them from the ice maker. Your refrigerator does not have a defrost timer.

The defrost cycle is controlled by an adaptive defrost board. The adaptive defrost board turns the compressor and both fan motors off and turns the defrost heater on when it is time for a defrost. Hope someone can direct me here as I never repaired a fridge before: SEAR KENMORE french door style fridge. With ice and water dispenser.

If that fan is not turning thats the reason your refrigerator is not cooling. Hopefully it has not ran that way for a long time because that is bad for the compressor. The fridge side is not very cool.

If its going to get cold the freezer should be cold in about hours, as long as you have sit your fan so it blows into the back then thats where you want it. We Are Your Local Repair Experts. Many models do not come with external fans behind the cooling unit. For the RVers that love the heat, we recommend installing some fans in the back to help with the air flow. The thermostat allows power to flow through to the compressor, evaporator fan and condenser fan.

If the cooling system fans and compressor are running, but the refrigerator or freezer is not cooling correctly check for an airflow or defrost. There are several ways to fix a Frigidaire refrigerator or freezer that is not cold enough that depend on the source of the problem. Problems in any one of these areas can result in temperatures that are too high. The compressor is the component on your refrigerator that allows your refrigerator to cool. Most of the time the compressor is not the component that has failed.

There are other parts on your refrigerator that have to start the compressor. GE side by side refrigerator freezer is not freezing or cooling…. If defrost does not occur, frost accumulates and suffocates proper air flow throughout your entire refrigerator. This is how I am paid for my time and advice.

Positive feedback and bonuses are greatly appreciated. If this has helpe please choose the accept button. Only a Factory Certified Service technician can determine the exact cause of a cooling issue.

For any warm temperatures in a Sub-Zero refrigerator : Verify the unit is on and running for at least hours. If not , wait hours for unit to cool properly. The Damper controls the amount of cold air that flows from the freezer section to the fridge section. Check the setpoint temperatures for the compartment. If it is broken or stuck, the fridge may not get cold enough.

It means the door switch did not detect the door closing. Thus, cold air will not blow in the unit, and the unit will not get cold. How to check door switch x The door switch may be disconnected.