Evaporative cooler water supply line

Save swamp cooler water line to get e-mail alerts and updates on your eBay Feed. How to install a water line to a swamp cooler. Install the water to the float. Some evaporative coolers use a water line connected directly to a hose bib.

Find quality evaporative cooler accessories online or in store.

The Cooler Sill Cock will help you easily The Cooler Sill Cock will help you easily create a water supply line for your evaporative cooler. All you do is screw the Sill Cock onto an existing outdoor hose Bibb. The water supply line to the cooler float should be ¼-in.

Unsecured water lines can set up water hammering from the cooler all the way down to the shut-off valve. Shop dial copper and brass evaportative cooler water hook-up kit in the evaporative cooler accessories section. Connecting a water line to a swamp cooler is a easy job that almost anyone can do.

They work by screwing on to the existing faucet and adding a second faucet for a hose and a side mount for the swamp cooler line to connect to.

The refill valve for the reservoir occasionally fails to close, causing a constant stream of water to enter the reservoir and drain out the overflow line. Click her for a complete write up and product links. Soft water will cause corrosion and decrease the life of the cooler. Attach water line to float. At-tach the water supply line to the float in the same manner as above.

The float may be installed in either the corner post or bracket (Fig. 8). Below are the instructions for attaching them to the evaporative cooler. First, attach the float valve assembly as shown in the cooler instruction manual. First, locate the valve that supplies water to the swamp cooler and shut off the water.

Then disconnect the water line from the swamp cooler and pull it down off the side of the house. Evaporative swamp cooler parts, pads, covers and Mastercool pads and pumps. If possible disconnect the water. Find a source for water as close as possible to the swamp cooler. Fittings are sold to convert outside faucets so that a hose can be put on one side and the line to the cooler on the other.

To shut it down during the winter, drain any excess water from the cooler and water supply line , disconnect the water line , cover the cooler , and unplug it from the power supply , especially if it will not be used for an extended amount of time.

Swamp coolers need a constant supply of water. Water line to a Swamp Cooler. As water keeps evaporating from the unit to cool the air, more water needs to replace it. The performance of an evaporative cooler is based on the ratio of the number of degrees it can cool the air compared to the Wet Bulb Depression (dry bulb temp minus wet bulb temp). Hooking a water line to an evaporative cooler is not a difficult job but be sure to call a professional if in doubt.

If a water pipe is going to be worked on be sure to turn off the water at the Main. Always drain all of the water out of the cooler and water supply line when not in use for prolonged periods, and par-ticularly at the end of the season. Keep the water line disconnected from both the unit and water supply so that it does not freeze. The In- Line Scale Eliminator Cartridge is not a sediment filter. Also find maintenance items such as evaporative cooler cleaner, water conditioner tablets and mineral treatment to soften water.

The copper line or the main water line carries water into the swamp cooler. This line is secured with a thick nut called a compression nut. Use a wrench to tighten the nut. If water is still dripping from the nut, you need to check the washer.

Shut-off the water supply. The EC111B is a portable cooler , which means that it doesn’t attach to a water supply line , but instead has a tank that’s manually filled with water and ice. Disconnect the water line by loosening the. This unit is one of the few ones out there which have a completely removable tank. This prevents scale buildup at the source, which is much easier than removing hard water deposits on the pads or pan.

Inline filters can be installed anywhere on a water line before the evaporative cooler. When choosing an evaporative cooler , keep in mind that, like air conditioners, evaporative coolers need to be the right size in order to adequately cool a room. Brisa window units are available in several different models and sizes to best serve your individual cooling needs.

The units are fully assembled so you can simply connect a water supply line , attach the chain kit and cooler legs, and plug the cord in to enjoy the benefits of your new cooler. A water treatment device f or use with evaporative coolers provides treatment of the water supply for such coolers. The device may be installed in series with the cooler in the water supply line and does not require any modification to the evaporative cooler itself. Always drain the water from the cooler and start with fresh water if it has not been in operation for a week.

If you are shutting down the cooler for an extended amount of time or the season, drain the water and clean the cooler. Cover cooler after cleaning. What is a portable evaporative cooler ? Champion Cooler offers the most comprehensive selection of aspen and rigid media residential and light commercial evaporative air coolers in the market.

We continue to redefine the standards of quality and innovation in evaporative cooling solutions. Float valve controls water level. Drain pipe assembly allows connection to a water hose to drain the unit. This evaporative cooler performs best in dry, arid climates.

If you don’t use your cooler for an extended perio be sure to empty and clean the reservoir to avoid the growth of mold and mildew in wet areas. This will keep your evaporative cooler functioning well and your air quality clean. Reconnect the water line and turn on the water supply. Check the float valve and make sure it is operating properly.

If necessary, adjust the float arm by bending it. Switch on the cooler motor and recirculating pump, making sure the cooler pads are being evenly saturated with water. A fan inside the unit pulls outside air through the sides and into the house. An evaporative cooler is a box-shaped appliance with one or more porous surfaces that enable air to pass through.

To produce cool air, each porous side is fitted with a pad of water -absorbing material. Disclaimer: Dial Manufacturing, Inc. Honeywell CS10XE 3CFM 1sq. This whole house evaporative cooler is wired to your home and connects to your water supply for continuous cooling for up to 6sq. The following Swamp Cooler Maintenance guide is provided by.

Plus – Portable gallon water reservoir is available where no water supply is readily accessible. Large 10″ semi-pneumatic rough terrain wheels available too.