Txv distributor

Sporlan Refrigerant Distributors The following is a selection of Sporlan references available for download. All information is in portable document format (.pdf). REFRIGERANT DISTRIBUTOR What is it? The refrigerant distributor is a device connected to the outlet of a thermostatic expansion valve (TEV).

The out-let of the distributor is machined to accept tubing which connects the distributor to each evaporator coil circuit. Customer Service Baker Online Rewards Apply For. So we have a TXV on a heat pump. Three lines come off the distributor. The two lines going to the lowest and middle sections of the coil, when the unit was mostly working okay in heat mode, were sweating and had a temp of about F on a F ambient morning.

The TC thermostatic expansion valve has been developed and designed for soldering into hermetic refrigeration systems. It is manufactured in stainless steel and is therefore very suitable for installation in refrigeration systems for the food industry. TEV) into each circuit of a multi-circuit evaporator coil. THE DISTRIBUTION PROBLEM A portion of the liquid refrigerant passing through the thermostatic expansion valve (TEV) normally flashes, resulting in two-phase (liquid and vapor) flow at the valve outlet, see Figure 1. For over years the Parker Sporlan Division has set the industry standard for the development and manufacture of leading edge high quality HVACR components. Product Catalog RD 52Series TXV Style Aluminum Distributor.

Introduction Features Applications Technical Data. The RD 52Series Thermostatic Expansion Valve ( TXV ) Style Aluminum Distributor is designed with an industry unique chamber enhancing active turbulence and improving even distribution of each circuit. Brazing brass distributor body to a copper TXV port I need to braze a large (port) distributor block to a TXV body. A TXV being restricted will cause the evaporator, compressor, and condenser to be starved of refrigerant. This will cause low suction pressures, high superheats, low amp draws, and low head pressures.

Also, the symptoms of a restricted TXV system are very similar to a system with a refrigerant undercharge. Expansion valve , Distributor , Liquid line assembly brazed together. Coil has circuits; one TXV is required per circuit. TXV with all threaded connections;.

Advanced Distributor Products, 21West Park Place Boulevar Stone Mountain, GA 30087. AHRI AHRI Certified ESL Hardi HRAI. NOTE: To access the coil components where this retrofit occurs, it may be necessary to remove the access panels and slide the coil out of the housing. Disassemble flowrater body and remove piston using a small wire or pick. The thermostatic expansion valve ( TXV ) is a precision device, which is designed to regulate the rate at which liquid refrigerant flows into the evaporator.

This controlled flow is necessary to prevent the return of liquid refrigerant to the compressor.