Ice rink piping system

ProCurl Curling Rink Piping. Its unique design keeps the pipes close together and level, maintaining a uniform ice temperature so the rock’s speed and curl are consistent shot after shot. Permanent ice rink piping system.

An equal distance is maintained with the help of spacers between the flow pipe and return pipe , the size of the distance depending of the size of the ice rink. The pipe connections are welded. Our ice rink piping provides greater heat-exchange surface area than conventional indirect or direct refrigeration piping systems.

Extremely uniform ice temperature, with only ow pressure drop and low pump-hose power. They are excellent for retrofit over old concrete rink floors and provide simple, fast installation in concrete,. The rink piping system is one of the most important factors in a high quality ice sheet.

An exceptional sheet of ice depends largely on the ability of the rink piping to remove heat in a uniform and efficient manner. Enter the experts at Everything Ice. Ice Rink Supply refrigeration rink pipe grids are as much as 4 more efficient than convention rink pipe grids used by others. With the highest dynamic pipes surface area, IRS has the shortest heat dwell time in the ice found in the industry!

Equipment for maintaining your ice rink is of the highest quality and of the best design.

To freeze the rink surface, the system pumps 0gallons (30L) of freezing brinewater through the pipes and then onto the ice-bearing concrete slab. The ice-bearing slab sits between the skating surface (D) and a layer of insulation. Recreational Ice Rink Chiller Systems.

For years, Berg has provided industrial process temperature control solutions with chilling, pumping and freezing equipment to achieve superior curling and skating ice surfaces for the global ice rink equipment market. More commonly the floor consists of a or cement pad reinforced with Rebar. The headers are constructed of PVC or steel. The brine is supplied to the floor via to headers.

Unlike other ice mat systems, CALMAC offers a factory-installed main header design option, which reduces time and labor. IceMat also provides greater heat-exchange surface area. Call Custom Ice today for a free quote on our EnergyIce High Efficiency Piping System. Quality ice starts with the refrigeration pipes under the ice (the pipe grid). Portable ice rink piping grid can be installed on any level surface, either indoor or outdoor.

PVC supply and return headers on one end and return bends on the other end. Frost under the floor will eventually cause heaving of the rink. MM Refrigeration’s series of packaged ice rink chillers are based on our well-known reciprocating compressors, high efficiency evaporators with flooded surge drum, and MM System ’s Ice Rink Control System (IRCS).

Two large water filtration systems to produce deionized water, which is essential for making clear ice. Headers are located in an accessible trench at the end of the ice rink.

Removable covers are set over the trench, made of woo steel or concrete. Elements such as vapor barriers, insulation selection, lighting layouts to just name a few, are all different for the local contractor. Confirming the drawings are accurate to the required design is half the battle. Underfloor cooling is a form of cooling which achieves indoor climate control using conduction, radiation and convection.

Plastic Ice Floor Piping System. The terms radiant cooling are commonly used to describe this approach. Peak Pipe Systems have years of experience in the Geothermal industry which gives us knowledge of underfloor heating and cooling systems. Rink ice portable piping system , outdoor portable refrigerated ice rink cooling systems.

Selective focus and color effect. Caution: Air can be worked out of the brine system at the header purge valves and through the balance tank. To assist in rapid air removal, full sized tees are highly recommended in the brine mains for the balance tank line takeoffs.

Over a period of years some of the nipples from the headers can become partially or totally restricted. The wide range of standard ice rink chillers consists of two-compressor units for single rinks and three-compressor units. Direct systems , meanwhile, circulate these refrigerants through the nearly miles of pipe that.

The glycol is then pumped from the chiller to the connected ice rink elements through the flow pipe system. How we make ice Because the refrigerant in the pipes is colder than the surrounding water, this system will absorb the warmth of the water. The size of the chiller depends on the size of your backyard ice rink. A 4-ton ice rink chiller is about the smallest available. Installation of ice rink piping.

Cooling systems , piping systems , ice resurfacers. The center of our rink had risen more than six inches, said Gullen. A good example of this is the construction of the ice rink floor.

As little as one inch in variation in the placement of the ice rink piping can noticeably affect the quality of the ice and cost of operation. Created with a specific customized process, freezing layer by layer the First Line ice is generated to optimize your skating enjoyment. Refrigeration Rink Systems have 2″ of solid ice, and Natural Rink Systems have 3-4″ weather dependant, and they are flooded to perfection. This means that the heat created by the refrigeration system can be recycle which is both energy and cost efficient.

Ice rinks need heating systems as well as refrigeration systems. Heat is a by-product of all compressors. Geothermal Supply Company custom fabricates specialty headers for ice rink piping.

Header pipe saddle fitting spacing of 7” O. Complete Mechanical Maintenance for Ice Rink Facilities. Proper maintenance of piping and refrigeration systems will result in lower costs and a more productive business, while optimized HVAC offers the same. You need experts who carry extensive experience, thorough training, and all of the tools necessary to cover all of your unique needs. Ice Rink Events redesigned the rink floor piping system , whose classic makeup consists of a chiller connected to a header manifold from which smaller diameter pipes extend to cover the surface of the rink. Ice rink piping mats products are most popular in Western Europe, South America, and Domestic Market.

Direct refrigeration system A direct refrigeration system (Figure 2) circulates refrigerant in a piping system imbedded directly in the rink floor. This format has been used for a small number of refrigeration systems throughout the United States but rarely in Canada. Refrigeration systems in Canadian ice rinks traditionally used HCFC R-refrigerant or ammonia (R -717).

R-was mainly used in the Prairies (Manitoba and Saskatchewan) and in Quebec, the main reason for this being that these systems were less expensive while still providing excellent operational performance.